Difference between revisions of "Making a quick and easy stand for finishing scales"
m (New images. Thanks, Walt!) |
m (Dang. A typo.) |
||
Line 3: | Line 3: | ||
I was finishing some scales with CA today and remembered the wire stand that Glen had made. I didn't have the materials at hand to duplicate his, but I did have some jumbo paper clips that I thought might be a good substitute. They worked real well and could probably be made even sturdier by stapling them to a piece of scrap wood. | I was finishing some scales with CA today and remembered the wire stand that Glen had made. I didn't have the materials at hand to duplicate his, but I did have some jumbo paper clips that I thought might be a good substitute. They worked real well and could probably be made even sturdier by stapling them to a piece of scrap wood. | ||
− | <gallery caption="Here's what I did:" widths="400px" heights="250px"perrow="2"> | + | <gallery caption="Here's what I did:" widths="400px" heights="250px" perrow="2"> |
Image:Making_a_quick_and_easy_stand_for_finishing_scales_-0No._1.jpg|Jumbo paper clip | Image:Making_a_quick_and_easy_stand_for_finishing_scales_-0No._1.jpg|Jumbo paper clip | ||
Image:Making_a_quick_and_easy_stand_for_finishing_scales_-0No._2.jpg|Bend the smaller, inside, leg straight up. | Image:Making_a_quick_and_easy_stand_for_finishing_scales_-0No._2.jpg|Bend the smaller, inside, leg straight up. |
Revision as of 10:48, 16 May 2009
This article was originally posted by Walt[1]
I was finishing some scales with CA today and remembered the wire stand that Glen had made. I didn't have the materials at hand to duplicate his, but I did have some jumbo paper clips that I thought might be a good substitute. They worked real well and could probably be made even sturdier by stapling them to a piece of scrap wood.