Difference between revisions of "Easily make a pasted balsa strop"
m (references) |
m (Categories) |
||
| Line 1: | Line 1: | ||
| − | |||
Originally posted by [http://www.straightrazorplace.com/forums/members/backpackerx.html backpackerx].<ref>http://www.straightrazorplace.com/forums/strops/24929-how-easily-make-pasted-balsa-strop.html</ref> | Originally posted by [http://www.straightrazorplace.com/forums/members/backpackerx.html backpackerx].<ref>http://www.straightrazorplace.com/forums/strops/24929-how-easily-make-pasted-balsa-strop.html</ref> | ||
| Line 16: | Line 15: | ||
<references /> | <references /> | ||
| + | |||
| + | [[Category:Equipment]] | ||
| + | [[Category:Razor_Hones]] | ||
| + | [[Category:Maintenance_and_honing]] | ||
Revision as of 13:47, 22 November 2008
Originally posted by backpackerx.[1]
Just finished making a homemade balsa strop and thought I'd post here since it's so easy. I did this because I'm a newbie who has blown the budget for a while and can't buy one and also because it's so dead easy that even I, who have zero craftsman abilities, could do. Hopefully I can figure out how to get the pictures to post on here.
This literally requires 6 things. A porch or stair spindle from Home Depot ($2), a piece of Balsa from a craft store ($3), something to make one small 2" straight cut, a utility knife, glue, and some sand paper. I saw the spindle at Home Depot and noticed that if cut in half it would make a great base for the paddle and had a nice looking handle built right in! I simply cut the spindle in half, cut some balsa to fit the end, glued it on and sanded it to lap it flat. Cost about $5 and took about 10 minutes. See results below. The last picture is what the spindle looks like together.
- Making the strop
