Difference between revisions of "Restoring a Straight Razor"
m (added sections) |
m (added reference) |
||
Line 1: | Line 1: | ||
− | This article was originally posted | + | This article was originally posted on SRP<ref>http://www.straightrazorplace.com/forums/workshop/27902-start-finish-razor-restore.html</ref> by [http://www.straightrazorplace.com/forums/members/gssixgun.html gssixgun] |
== Background == | == Background == | ||
Line 83: | Line 83: | ||
As to the wedge end ??? Yes the wedge is coated to as I do the outside, I do 3-5 coats depending on the finish I am using, this is for wood/bone wedges... | As to the wedge end ??? Yes the wedge is coated to as I do the outside, I do 3-5 coats depending on the finish I am using, this is for wood/bone wedges... | ||
+ | |||
+ | == Notes == | ||
+ | <references/> | ||
[[Category:Tutorials]] | [[Category:Tutorials]] | ||
[[Category:Soaps_and_Creams]] | [[Category:Soaps_and_Creams]] |
Revision as of 13:49, 11 November 2008
This article was originally posted on SRP[1] by gssixgun
Background
This is a thread that I have been wanting to do for awhile, but these things take time, and half the time when I go out to the shop I forget the camera.... This restore I finally got pics of just about the whole process so I figured I would do a complete restore in pictures....
The Razor Used In This Tutorial
This is a C.W.Dahlgren Eskilstuna Medalier Chicago 1893 the proof marks show 1886, 1888, 1881, 1878 the frameback is stamped Sanvik Bessamer Stal.....
The scales are Spalted Apple, the wedge is Brown Ebony.... Nickel Silver pins and SS washers... This one has 15 coats of Satin Wipe on Poly for the finish...
Starting out the razor has a very small touch of rust and some patina, the scales are shot...
The Process
While I am working on the scales the blade will be spinning along, I use the Turtle Wax Rubbing compound in with the walnut media (re-fresh this about every 4 months) after 48 hours I will check the blade and use 800 grit sandpaper to take off any remaining spots and let it spin some more After that it will go through the same thing with Corncob media and Turtle Wax Polishing compound.... Keep in mind this will not take off rust or pitting....
The scales are finished and ready to become a complete razor, How and what you use as a finish is totally up to you, try different things to get the look you want... (How I prep the wood is the only part of this, I can't actually share, as parts of it are proprietory to my Rifle Stocks) the wipe on Poly's from minwax are working very well on the razors....
Q&A
Q. Glen, as usual, awesome job! I'd like to know a little more about how you go about doing the wipe-on poly with the inside of the scales and the wedge. Do you coat the entire inside of the scale (once or more)? Do you coat the wedge prior to installation? Do you pin the wedge end and then coat all of it as a unit?
A. First thing I do is 3 coats of finish on the inside, after that really dries, I put two pieces of double side tape on the edge of what ever mailing box is in the room at the time.... I stick the scales to the box where the wedge would go, and then start the process of doing the outside coats with a box to hang unto and the scales securely attached to it.... This is for wipe on finishes....
As to the wedge end ??? Yes the wedge is coated to as I do the outside, I do 3-5 coats depending on the finish I am using, this is for wood/bone wedges...