Difference between revisions of "DSLR And Reversed Lens As Microscope"

From Shave Library
Jump to: navigation, search
m (Text replace - "/forums/" to "/")
m (Text replacement - "straightrazorplace" to "straightrazorpalace")
Line 120: Line 120:
  
 
== Acknowledgements ==
 
== Acknowledgements ==
This article was written by [http://straightrazorplace.com/members/sparq.html Sparq] (a.k.a "Author")
+
This article was written by [http://straightrazorpalace.com/members/sparq.html Sparq] (a.k.a "Author")
  
 
[[Category:Photography]]
 
[[Category:Photography]]

Revision as of 18:33, 7 February 2018

Abstract: This article demonstrates how to use a DSLR camera with a reversed lens for taking high level magnification images of razor edges, and as a simple yet powerful microscope.

Goal

The goal of this article is to show you how to take pictures like the ones in this page with your photo equipment for cheap. The "trick" discussed here is use of reversed wide angle primes on DSLR bodies. Good information about this technique can be found on internet with ease. Here is an excellent example: http://photography-on-the.net/forum/showthread.php?t=239915

Prerequisites

  1. A DSLR camera of any brand or vintage that allows for manual focus lenses
  2. A wide-ish (prime) lens for a 35mm camera with manual aperture control. Some wide zooms may work as well.
  3. An adapter for reverse mounting of your lens to your DSLR body
  4. A tripod
  5. A well lit surface for placing your razor such as a kitchen counter top
  6. Patience and will to experiment

Camera

Any DSLR camera with a support for manual focus lenses should work as long as you can get a reverse adapter for it. Author uses a 4/3rds Panasonic DMC-L1 but most (if not all) DSLRs should work (except for those dumbed-down by their manufacturer to force you to use their expensive auto focus lenses). Author highly recommends cameras with Live view as they make focusing easy and that can also work as high magnification microscopes.


Lens

High magnification macro pictures can be taken with reverse mounted fixed focal length lenses. The general rule of thumb is: the shorter the focal length of the lens is, the higher the magnification but also the narrower the depth of field and the closer the focus distance (too wide == too close to the lens). Usable focal length range is typically between 25-50mm (in 35mm format terms). The lens should have a manual aperture control as it can not be electrically linked to a camera. Note that as the mounting is done via the lens's filter thread, it does not have to be from the same manufacturer as the camera.

Author uses a f=29mm vintage Exakta lens (Meyer Görlitz Orestegon 2.8/29) on a 4/3rds body. This combination yields magnification demonstrated below.

Hidden bonus: you can use the same lens for direct observation of edges during honing. They are better than many cheap microscopes out there.

Adapter

Adapters for reverse mounting of lenses are readily available on 'bay for less than $10 (see http://shop.ebay.com/i.html?_nkw=reverse+lens+adapter). They mount lenses via their front filter thread so make sure you have a match against your camera body AND against the filter size of your lens. Author uses a combination of two adapters - a filter thread to Exakta body adapter and an Exakta lens to 4/3rds body adapter to mount the Orestegon to the L1.

Tripod

A solid tripod is a must. Slightest camera vibrations will ruin your pictures. You can use anything that lets you place the camera near a counter top or any other well lit surface where the razors will be placed.

Well lit surface

Obviously, anything works as long as the place is well lit and the razor is safe. Keep in mind that variations in lighting will make it impossible to compare a series of pictures. With fixed light, your changes of repeating the exact lighting conditions may be higher. Note that the relative position of the edge vs. the light source has tremendous impact on the final images, see below.

Hint: It is better to have dark background against the edge.

Taking Pictures

Here is an example just for your entertainment and inspiration. You are a skilled photographer and so you will likely figure out a better method quickly.:)

Mount the lens to the camera via the reverse adapter. Switch your camera to a mode that allows use of manual focus lenses and switch on the live view if available. Place the camera on a tripod and place it near the counter top. Place a sheet of newspaper on the counter top and play with the tripod and the camera (position, angles, distance) until you get a straight and well focused picture of the newspaper in the viewfinder or on the LCD. Place the razor edge near the center of focus and re-adjust the camera and razor positions until you get a well focused image of the edge. Mind how the razor's edge is lit. You will have to focus with distance - with moving the edge forth and back. It can be confusing initially but one gets used to it quickly. When well focused, take the picture but make sure you do not shake or move the camera (remote shutter release or self-time use is HIGHLY recommended). Feel free to experiment with apertures, the smaller the aperture the larger the DOF but also the longer the exposure.

When everything goes as planned, you should be getting pictures like those in this page or better.


Post-processing

In order to achieve maximum sharpness, author recommend shooting raw or highest quality jpg files and post-processing them in your favorite editor. Author has been using Picture Window Pro with excellent results for years (inexpensive, works with 16bpc, can process very very very large files (i.e. large scans of 8x10 negatives) and does not require big hardware). You will need crop, resize, brightness curve and sharpness adjustments.

Hint: toss the RGB and work with grayscale only. Author's preferred method is using the green channel as it has usually the least noise (a trick learned when working with scanners).


Using Camera as a Microscope

In order to be able to see the magnified picture on the camera LCD instead of in the viewfinder, the camera needs to have Live view. Switch it on and use the "digital zoom" for highest magnification (if your camera is equipped with one). It works very well on author's DMC-L1.

Troubleshooting

Under construction

Geometry, calculations, magnification

Under constructions. Volunteers are welcome. :)

Gallery

Progression of coarse to fine natural hones

An edge honed on aoto, aoto slurry on C12K, washita, coticule with slurry. Each picture was taken after several dozens of laps on each stone when swarf was clearly detectable in slurry. Author tried to take a picture of the same section of an edge and marked the blade with a black marker. He had, however, re-draw the mark quite often, hence the fit is not 100% perfect.

Click on the pictures for high resolution versions.

Surfaces of natural hones

Pictures of surfaces of hones used in the previous progression.

Discussion, comments

Please add your comments, complaints, experience and links to your pictures to the discussion page of this article.

Acknowledgements

This article was written by Sparq (a.k.a "Author")