Difference between revisions of "Making a quick and easy stand for finishing scales"
m (Text replace - "/forums/" to "/") |
m (Text replacement - "straightrazorplace" to "straightrazorpalace") |
||
Line 1: | Line 1: | ||
− | This article was originally posted by [http:// | + | This article was originally posted by [http://straightrazorpalace.com/members/walt.html Walt]<ref>http://straightrazorpalace.com/workshop/35972-quick-easy-stand-finishing-scales.html</ref> |
I was finishing some scales with CA today and remembered the wire stand that Glen had made. I didn't have the materials at hand to duplicate his, but I did have some jumbo paper clips that I thought might be a good substitute. They worked real well and could probably be made even sturdier by stapling them to a piece of scrap wood. | I was finishing some scales with CA today and remembered the wire stand that Glen had made. I didn't have the materials at hand to duplicate his, but I did have some jumbo paper clips that I thought might be a good substitute. They worked real well and could probably be made even sturdier by stapling them to a piece of scrap wood. |
Revision as of 18:33, 7 February 2018
This article was originally posted by Walt[1]
I was finishing some scales with CA today and remembered the wire stand that Glen had made. I didn't have the materials at hand to duplicate his, but I did have some jumbo paper clips that I thought might be a good substitute. They worked real well and could probably be made even sturdier by stapling them to a piece of scrap wood.